HP 7000 dl Router manual Debug atm packet interface atm vc ATM port VPI/VCI vcd vcd, Number

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug atm packet [interface atm vc] < ATM port VPI/VCI> vcd <vcd

number>

Use the debug atm packet command to activate debug messages associated with packets on ATM ports and virtual circuits. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.

Variations of this command include the following:

debug atm packet	.
debug atm packet [interface atm vc] <port id>
debug atm packet interface atm <port id> vcd <port>

Syntax Description

interface atm	Shows packets on a specific ATM port and on all virtual circuits.
vc	Shows packets on a specific virtual circuit.
<ATM port>	Specifies ATM port number.
<VPI/VCI>	Specifies virtual path identifier and virtual channel identifier (VPI/VCI).
vcd	Shows packets on specific virtual circuit descriptors (VCD).
<vcd number>	Specifies a VCD port number.

Default Values

By default, all debug messages in the SROS are disabled.

Command Modes

# Enable Command Mode

Usage Examples

The following example activates debug ATM packet debug messages on ATM port 1:

>enable

#debug atm packet interface atm 1

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 64