HP 7000 dl Router manual Domain-name domain

SROS Command Line Interface Reference Guide DHCP Pool Command Set

domain-name <domain>

Use the domain-namecommand to specify the domain name for the Dynamic Host Configuration Protocol (DHCP) client. Use the no form of this command to remove the configured domain name.

Syntax Description

<name>	Alphanumeric string (up to 32 characters in length) used to identify the DHCP
	client.

Default Values

By default, there are no specified domain-names.

Command Modes

(config-dhcp)# DHCP Pool

Usage Examples

The following example specifies a domain name of procurve.com:

(config)#ip dhcp-server pool MyPool (config-dhcp)#domain-name procurve.com

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 361