HP 7000 dl Router manual Ip dhcp release renew

SROS Command Line Interface Reference Guide Frame Relay Sub-Interface Config Command Set

ip dhcp [release renew]

Use the ip dhcp command to release or renew the DHCP IP address. This command is only applicable when using DHCP for IP address assignment.

Syntax Description

release	Use this keyword to release DHCP IP address.
renew	Use this keyword to renew DHCP IP address.

Default Values

No default values required for this command.

Command Modes

(config-interface)# Interface Configuration Mode required (applies only to virtual interfaces)

Usage Examples

The following example releases the IP DHCP address for the virtual interface:

(config)#interface frame-relay 1.3 (config-fr 1.3)#ip dhcp release

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 622