#ping

	Common Commands

Source Address	Specifies the IP address to use as the source address in the ECHO_REQ (or
	interface) packets.
Data Pattern:	Specifies an alphanumerical string to use (the ASCII equivalent) as the data
	pattern in the ECHO_REQ packets.
Sweep Range of Sizes:	Varies the sizes of the ECHO_REQ packets transmitted.
Sweep Min Size:	Specifies the minimum size of the ECHO_REQ packet (valid range: 0 to
	1488).
Sweep Max Size:	Specifies the maximum size of the ECHO_REQ packet (valid range: Sweep
	Min Size to 1448).
Sweep Interval:	Specifies the interval used to determine packet size when performing the
	sweep (valid range: 1 to 1448).
Verbose Output:	Specifies an extended results output.

The following is an example of a successful ping command:

Target IP address:192.168.0.30

Repeat count[1-1000000]:5

Datagram Size [1-1000000]:100

Timeout in seconds [1-5]:2

Extended Commands? [y or n]:n Type CTRL+C to abort.

Legend: '!' = Success '?' = Unknown host '$' = Invalid host address '*' = Request timed out '-' = Destination host unreachable

'x' = TTL expired in transit

Pinging 192.168.0.30 with 100 bytes of data:

!!!!!

Success rate is 100 percent (5/5) round-trip min/avg/max = 19/20.8/25 ms

5991-2114

932

HP 7000 dl Router manual #ping