HP 7000 dl Router manual Clear bridge group#, Enable #clear bridge

SROS Command Line Interface Reference Guide Enable Mode Command Set

clear bridge <group#>

Use the clear bridge command to clear all counters associated with bridging (or for a specified bridge-group).

Syntax Description

<group#> Optional. Specifies a single bridge group (1-255).

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following example clears all counters for bridge group 17:

>enable

#clear bridge 17

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 25