HP 7000 dl Router Ntp-serverip address, Config#ip dhcp-server pool MyPool config-dhcp#ntp-server

SROS Command Line Interface Reference Guide DHCP Pool Command Set

ntp-server<ip address>

Use the ntp-servercommand to specify the name of the Network Time Protocol (NTP) server published to the client.

Syntax Description

<ip address> Specifies the IP address of the NTP server.

Default Values

By default, no NTP server is defined.

Command Modes

(config-dhcp)# DHCP Pool

Usage Examples

The following example specifies the IP address of the NTP server:

(config)#ip dhcp-server pool MyPool (config-dhcp)#ntp-server 192.168.1.1

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 369