HP 7000 dl Router manual Show ip access-lists listname, Enable #show ip access-lists

SROS Command Line Interface Reference Guide Enable Mode Command Set

show ip access-lists <listname>

Use the show ip access-listscommand to display all configured IP access lists in the system.

Syntax Description

<listname> Optional. Specify a particular access list to display.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Functional Notes

The show ip access-listscommand displays all configured IP access-lists in the system. All entries in the access list are displayed, and a counter indicating the number of packets matching the entry is listed.

Usage Examples

The following is a sample output from the show ip access-listscommand:

>enable

#show ip access-lists

Standard IP access list MatchAll permit host 10.3.50.6 (0 matches)

permit 10.200.5.0 wildcard bits 0.0.0.255 (0 matches) Extended IP access list UnTrusted

deny icmp 10.5.60.0 wildcard bits 0.0.0.255 any source-quench (0 matches) deny tcp any any (0 matches)

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 140