HP 7000 dl Router manual Spanning-tree bpdufilter enable disable

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

spanning-tree bpdufilter [enable disable]

Use the spanning-tree bpdufilter command to enable or disable the bpdufilter on a specific interface. This setting overrides the related global setting. Use the no version of the command to return to the default setting.

Syntax Description

enable	Enable bpdufilter for this interface.
disable	Disable bpdufilter for this interface.

Default Values

By default, this setting is disabled.

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: Ethernet, virtual PPP interfaces (ppp 1), virtual Frame
	Relay sub-interfaces (fr 1.20), and atm sub-interfaces (1.2).

Functional Notes

The bpdufilter blocks any BPDUs from being transmitted and received on an interface.

Usage Examples

The following example enables the bpdufilter on the interface eth 0/1:

(config)#interface eth 0/1

(config-eth0/1)#spanning-tree bpdufilter enable

The bpdufilter can be disabled on the eth 0/1 by issuing the following commands:

(config)#interface eth 0/1

(config-eth0/1)#spanning-tree bpdufilter disable

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 478