HP 7000 dl Router Ip firewall attack-log threshold value, Config#ip firewall attack-log threshold

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

ip firewall attack-log threshold <value>

Use the ip firewall attack-log threshold command to specify the number of attack mounting attempts the Secure Router OS will identify before generating a log message. Use the no form of this command to return to the default threshold.

Note	The Secure Router OS security features must be enabled (using the ip firewall command)
	for the stateful inspection firewall to be activated.
Syntax Description
<value>	Specifies the number of attack mounting attempts the Secure Router OS will
	identify before generating a log message (valid range: 0 to 4294967295).

Default Values

<value>100

Command Modes

(config)# Global Configuration Mode

Usage Examples

The following example specifies a threshold of 25 attacks before generating a log message:

(config)#ip firewall attack-log threshold 25

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 279