HP 7000 dl Router manual Qos-policy out mapname

SROS Command Line Interface Reference Guide HDLC Command Set

qos-policy out <mapname>

Use the qos-policy out command to apply a previously-configured QoS map to an interface. Use the no form of this command to remove the map from the interface. The out keyword specifies that this policy will be applied to outgoing packets.

Syntax Description

<map name> Specifies the name of a previously-created QoS map.

Default Values

No default value is necessary for this command.

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual
	HDLC interfaces (hdlc 1), virtual Frame Relay sub-interfaces (fr 1.20), tunnel
	interfaces (tunnel 1), and VLAN interface (vlan 1).

Usage Examples

The following example applies the QoS map VOICEMAP to the HDLC interface:

(config)#interface hdlc 1

(config-hdlc1)#qos-policy out VOICEMAP

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 845