SROS Command Line Interface Reference Guide

Enable Mode Command Set

 

 

debug interface < interface >

Use the debug interface command to activate debug messages associated with the specified interface. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.

Syntax Description

< interface >

Activates debug messages for the specified interface. Type debug interface ? for

 

a complete list of applicable interfaces.

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

#

Enable Command Mode

Functional Notes

The debug interface command activates debug messages to aid in the troubleshooting of physical interfaces.

Usage Examples

The following example activates all possible debug messages associated with the Ethernet port:

>enable

#debug interface ethernet

5991-2114

© Copyright 2005 Hewlett-Packard Development Company, L.P.

74

Page 74
Image 74
HP 7000 dl Router manual Debug interface interface, Enable #debug interface ethernet