HP 7000 dl Router Show lldp interface interface, #show lldp interface ethernet 0/1 eth 0/1 TX/RX

SROS Command Line Interface Reference Guide Enable Mode Command Set

show lldp interface <interface>

Use the show lldp interface command to display LLDP configuration and statistics for interfaces on this device.

Syntax Description

<interface>	Displays the information for the specified interface. Type show lldp interface ?
	for a complete list of applicable interfaces.

Default Values

No default values are necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following example shows LLDP configuration and statistics for the Ethernet 0/1 interface:

#show lldp interface ethernet 0/1 eth 0/1 (TX/RX)

0 packets input

0 input errors

0 TLV errors, 0 TLVs Discarded

0 packets discarded

8799 packets output

0 neighbor ageouts

#

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 169