HP 7000 dl Router Signaling-mode message-oriented none robbed-bit, Message-oriented, Robbed-bit

SROS Command Line Interface Reference Guide DSX-1 Interface Configuration Command Set

signaling-mode [message-oriented none robbed-bit]

Use the signaling-modecommand to configure the signaling type (robbed-bit for voice or clear channel for data) for the DS0s mapped to the DSX-1 port.

Syntax Description

message-oriented	Clear channel signaling on Channel 24 only. Use this signaling type with QSIG
	installations.
none	Clear channel signaling on all 24 DS0s. Use this signaling type with data-only or
	PRI DSX-1 installations.
robbed-bit	Robbed bit signaling on all DS0s. Use this signaling type for voice-only DSX-1
	applications.

Default Values

By default, the signaling mode is set to robbed-bit.

Command Modes

(config-t1 1/2)# DSX-1 Interface Configuration Mode required

Usage Examples

The following example configures the DSX-1 port for PRI compatibility:

(config)#interface t1 1/2 (config-t1 1/2)#signaling-mode none

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 527