HP 7000 dl Router manual Client authentication host xauth-type generic otp radius

SROS Command Line Interface Reference Guide IKE Policy Command Set

client authentication host xauth-type [generic otp radius]

Use the client authentication host xauth-typecommand to allow the user to specify the Xauth authentication type if a type other than generic is desired.

Syntax Description

generic	Generic authentication type
otp	OTP authentication type
radius	RADIUS authentication type

Default Values

By default, this is set to generic.

Command Modes

(config-ike)# IKE Policy Configuration Mode

Functional Notes

This command is used along with the client authentication host username. See client configuration pool <poolname> on page 378 for more information. When acting as an Xauth host, this command allows the user to specify the Xauth authentication type if a type other than generic is desired.

Usage Examples

The following example sets the Xauth type to radius:

(config-ike)#client authentication host xauth-type radius

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 376