SROS Command Line Interface Reference Guide

PPP Interface Configuration Command Set

 

 

ppp chap hostname <hostname>

Use the ppp chap hostname command to configure an alternate hostname for CHAP PPP authentication. Use the no form of this command to remove a configured hostname. For more information on PAP and CHAP functionality, see the Technology Review section for the command ppp authentication <protocol> on page 766.

Syntax Description

<hostname>

Alphanumeric string up to 80 characters in length

Default Values

By default, there are no configured PPP CHAP hostnames.

Command Modes

(config-ppp 1)#

PPP Interface Configuration Mode required

Usage Examples

The following example specifies a PPP CHAP hostname of my_host:

(config)#interface ppp 1

(config-ppp 1)#ppp chap hostname my_host

5991-2114

© Copyright 2005 Hewlett-Packard Development Company, L.P.

770

Page 770
Image 770
HP 7000 dl Router manual Ppp chap hostname hostname, Config#interface ppp Config-ppp 1#ppp chap hostname myhost