HP 7000 dl Router manual Spanning-tree hello-time seconds

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

spanning-tree hello-time <seconds>

Use the spanning-treehello-timecommand to specify the delay interval (in seconds) between hello bridge protocol data units (BPDUs). To return to the default interval, use the no form of this command.

Syntax Description

<seconds>Delay interval (in seconds) between hello BPDUs. Range: 0 to 1000000.’

Default Values

<seconds>2 seconds

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example configures a spanning-tree hello-time interval of 10000 seconds: (config)#spanning-treehello-time 10000

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 349