HP 7000 dl Router manual Show startup-config checksum, #show startup-config checksum

SROS Command Line Interface Reference Guide Enable Mode Command Set

show startup-config checksum

Use the show startup-config checksum command to display the MD5 checksum of the unit’s startup configuration.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Functional Notes

This command is used in conjunction with the show running-config checksum command to determine whether the configuration has changed since the last time it was saved.

Usage Examples

The following example displays the MD5 checksum of the unit’s startup configuration:

#show startup-config checksum

10404D5DAB3FE35E307B6A79AC6AC8C0

#

#show running-config checksum

10404D5DAB3FE35E307B6A79AC6AC8C0

#

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 190