HP 7000 dl Router manual Copy flash destination, Enable #copy flash tftp

SROS Command Line Interface Reference Guide Enable Mode Command Set

copy flash <destination>

Use the copy flash command to copy a file located in flash memory to a specified destination.

Syntax Description

<destination>	Specifies the destination of the copied file. Valid destinations include tftp and
	xmodem.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following example copies the contents of the unit’s flash memory to a TFTP server:

>enable

#copy flash tftp

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 56