HP 7000 dl Router manual Bonding txinit-timer seconds

SROS Command Line Interface Reference Guide BRI Interface Configuration Command set

bonding txinit-timer <seconds>

Use the bonding txinit-timercommand to specify the value (in seconds) for the originating endpoint negotiation timeout. Use the no form of this command to return to the default value.

Syntax Description

<seconds>	Specifies the number of seconds the endpoint waits to detect the BONDING
	negotiation frame pattern from the remote endpoint (when a call is connected)
	before considering the BONDING negotiation a failure

Default Values

<seconds> 10 seconds

Command Modes

(config-bri 1/2)# BRI Interface Configuration Mode required

Functional Notes

Specifies the length of time the originating endpoint attempts to detect the BONDING negotiation pattern from the answering endpoint before deciding the BONDING call has failed.

Usage Examples

The following example defines a txinit-timer value of 15 seconds:

(config)#interface bri 1/2

(config-bri 1/2)#bonding txinit-timer 15

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 561