HP 7000 dl Router manual Debug bridge, #debug bridge

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug bridge

Use the debug bridge command to display messages associated with bridge events. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to disable debug messages.

Syntax Description

No subcommands.

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Usage Examples

The following example activates bridge debug messages:

#debug bridge

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 65