HP 7000 dl Router manual Copyright 2005 Hewlett-Packard Development Company, L.P 696

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set

spanning-tree bpduguard [enable disable]

Use the spanning-tree bpduguard command to block BPDUs from being received on this interface. To return to the default value, use the no form of this command.

Syntax Description

enable	Enable the BPDU block.
disable	Disable the BPDU block.

Default Values

By default, this command is set to disable.

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: ATM sub-interface, Ethernet, virtual PPP interfaces, and
	virtual Frame Relay sub-interfaces

Usage Examples

The following example enables the bpduguard on the interface:

(config)#interface atm 1.1

(config-atm1.1)#spanning-tree bpduguard enable

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 696