SROS Command Line Interface Reference Guide

ATM Sub-Interface Config Command Set

 

 

oam-pvc managed <frequency>

Use the oam rety command to enable end-to-end F5 Operation, Administration, and Maintenance (OAM) loopback cell generation and OAM management for an ATM interface. Use the no form of this command to disable generation of OAM loopback cells.

Syntax Description>

<frequency>

Time delay between transmitting OAM loopback cells. The range is from 0 to 600

 

seconds.

Default Values

By default, the frequency is 1 seconds.

Command Modes

(config-atm 1.1)# ATM Sub-Interface Configuration Mode required

Usage Examples

The following example enables OAM loopback cell generation with a frequency of 5 seconds:

(config)#interface atm 1.1 (config-atm1.1)#oam-pvc manage 5

5991-2114

© Copyright 2005 Hewlett-Packard Development Company, L.P.

691

Page 691
Image 691
HP 7000 dl Router manual Oam-pvc managed frequency, Config#interface atm 1.1 config-atm1.1#oam-pvc manage