HP 7000 dl Router manual Sa4tx-bit 0, Config#interface e1 1/1 config-e11/1#sa4tx-bit

SROS Command Line Interface Reference Guide E1 Interface Configuration Command Set

sa4tx-bit [0 1]

The sa4tx-bitcommand selects the Tx value of Sa4 in this E1 interface. Use the no form of this command to return to the default value of 1.

Syntax Description

No subcommands.

Default Values

The default value for this command is 1.

Command Modes

(config-e1 1/1)# E1 Interface configuration mode.

Functional Notes

This command assigns a value to the Tx spare bit in position 4. The odd numbered frames of TS0 are not used for frame alignment. Bits in position 4 through 8 are called spare bits. Values of 0 or 1 are accepted..

TS0 odd frame

Bit position	1	2	3	4	5	6	7	8
Bit use	0	1	RAI = 1	S	S	S	S	S

Usage Examples

The following example sets the Tx value of Sa4 to 0:

(config)#interface e1 1/1 (config-e11/1)#sa4tx-bit 0

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 539