HP 7000 dl Router manual Access-class listname, Config#line telnet 0

Line (Telnet) Interface Config Command Set

access-class <listname> in

Use the access-class in command to restrict Telnet access using a configured access list. Received packets passed by the access list will be allowed. Use the access list configuration to deny hosts or entire networks or to permit specified IP addresses.

Syntax Description

<listname>	Alphanumeric descriptor for identifying the configured access list (all access list
	descriptors are case-sensitive).

Default Values

By default, there are no configured access lists associated with Telnet sessions.

Command Modes

(config-telnet X)# Line Configuration Mode required.

Functional Notes

When using the access-class in command to associate an access list with a Telnet session, remember to duplicate the access-class in command for all configured Telnet sessions 0 through 4. Telnet access to the unit using a particular Telnet session is not possible. Users will be assigned the first available Telnet session.

Usage Examples

The following example associates the access list Trusted (to allow Telnet sessions from the 192.22.56.0/24 network) with all Telnet sessions (0 through 4):

Create the access list:

(config)#ip access-list standard Trusted (config)#permit 192.22.56.0 0.0.0.255

Enter the line (telnet) :

(config)#line telnet 0 4

Associate the access list with the Telnet session:

(config-telnet0-4)#access-class Trusted in

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 888