HP 7000 dl Router manual Debug port-auth general packet both rx tx supp-sm, General, Both, Supp-sm

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug port-auth [general packet [both rx tx] supp-sm]

Use the debug port-authcommand to generate debug messages used to aid in troubleshooting problems during the port authentication process. Use the no version of this command to disable the messages.

Syntax Description

general	Optional. Displays configuration changes to the port authentication system.
packet	Optional. Displays information for packet exchange in transmit-only, receive-only
	or both directions.
both	Optional. Displays packet exchange information in both receive and transmit
	directions.
rx	Optional. Displays packet exchange information in the receive-only direction.
tx	Optional. Displays packet exchange information in the transmit-only direction.
supp-sm	Optional. Displays information pertaining to the supplicant state machine.

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Usage Examples

The following example activates port authentication debug information on received packets:

>enable

#debug port-auth packet rx

Received EAPOL Start for session 1 on interface eth 0/2

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 90