HP 7000 dl Router manual Spanning-tree edgeport

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

spanning-tree edgeport

Use the spanning-tree edgeport command to configure the interface to be an edgeport. This command overrides the related Global setting. Use the no version of the command to return to the default setting.

Syntax Description

No subcommands.

Default Values

By default, this setting is disabled.

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: Ethernet, virtual PPP interfaces (ppp 1), virtual Frame
	Relay sub-interfaces (fr 1.20), and atm sub-interfaces (1.2).

Functional Notes

Enabling this command configures the interface to go to a forwarding state when the link goes up.

Usage Examples

The following example configures the interface to be an edgeport:

(config)#interface eth 0/1

(config-eth0/1)#spanning-tree edgeport

An individual interface can be configured to not be considered an edgeport. For example:

(config)#interface ethernet 0/1

(config-eth0/1)#spanning-tree edgeport disable

or

(config)#interface ethernet 0/1 (config-eth 0/1)#no spanning-tree edgeport

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 481