HP 7000 dl Router manual Snmp-server view view-name oidtree excluded included

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

snmp-server view <view-name> <oidtree> [excluded included]

Use the snmp-server view command to create or modify a Simple Network Management Protocol (SNMP) view entry. Use the no form of this command to remove an entry.

Syntax Description

<view-name>	Label for the view record being created. The name is a record reference.
<oidtree>	Specifies the object identifier (oid) to include or exclude from the view. To identify
	the subtree, specify a string using numbers, such as 1.4.2.6.8. Replace a single
	subidentifier with the asterisk (*) to specify a subtree family.
excluded	Specifies an excluded view.
included	Specifies an included view.

Default Values

No default value necessary for this command.

Command Modes

(config)# Global Configuration Mode

Usage Examples

The snmp-server view command can include or exclude a group of OIDs. The following example shows how to create a view (named blockInterfaces) to exclude the OID subtree family 1.3.3.1.2.1.2:

(config)#snmp-server view blockInterfaces 1.3.6.1.2.1.2.* excluded

The following example shows how to create a view (named block) to include a specific OID:

(config)#snmp-server view block 1.3.6.1.2.1.2. included

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 344