HP 7000 dl Router manual Respond main aggressive anymode

SROS Command Line Interface Reference Guide IKE Policy Command Set

respond [main aggressive anymode]

Use the respond command to allow the IKE policy to respond to negotiations by a peer. Use the no form of this command to allow the policy to only initiate negotiations.

Syntax Description

main	Specify to respond to only main mode.
aggressive	Specify to respond to only aggressive mode.
anymode	Specify to respond to any mode.

Default Values

By default, respond to any mode is enabled.

Command Modes

(config-ike)# IKE Policy Configuration Mode

Functional Notes

By using the initiate and respond commands, you can configure the IKE policy to initiate and respond, initiate only, or respond only. It is an error if you have both initiate and respond disabled.

Usage Examples

The following example configures the router to initiate and respond to IKE negotiations:

(config-ike)#respond anymode (config-ike)#initiate main

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 385