HP 7000 dl Router manual Show dynamic-dns, #show dynamic-dns eth 0/1

SROS Command Line Interface Reference Guide Enable Mode Command Set

show dynamic-dns

Use the show dynamic-dnscommand to show information related to the dynamic DNS configuration.

Syntax Description

No subcommands.

Default Values

No default is necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is sample output from this command:

#show dynamic-dns eth 0/1:

Hostname: host

Is Updated: no

Last Registered IP: 10.15.221.33

Last Update Time: 00:00:00 UTC Thu Jan 01 1970

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 123