HP 7000 dl Router manual Spanning-tree cost cost value

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

spanning-tree cost <cost value>

Use the spanning-tree cost command to assign a cost to the interface. The cost value is used when computing the spanning-tree root path. Use the no version of the command to return to the default setting.

Syntax Description

<cost value> 1-200000000

Default Values

<value>1000/(link speed in Mbps)

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: Ethernet, virtual PPP interfaces (ppp 1), virtual Frame
	Relay sub-interfaces (fr 1.20), and atm sub-interfaces (1.2).

Usage Examples

The following example sets the interface to a path cost of 1200:

(config)#interface eth 0/1

(config-eth0/1)#spanning-tree cost 1200

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 480