4 – Managing Switches Displaying Switch Information

Q

4.2.6

Configured Zonesets Data Window

The Configured Zonesets data window displays all zone sets, zones, and zone membership in the zoning database, as shown in Figure 4-5. To open the Configured Zonesets data window, choose the Configured Zonesets tab below the data window in the faceplate display.

The Configured Zonesets data window uses display conventions for expanding and contracting entries that are similar to the fabric tree. An entry handle located to the left of an entry in the tree indicates that the entry can be expanded. Click this handle or double-click the following entries to expand or contract them:

„A zone set entry expands to show its member zones.

„A zone entry expands to show its members by port number, worldwide name, or Fibre Channel address.

Figure 4-5. Configured Zonesets Data Window

4-10

59048-02 A

Page 76
Image 76
Q-Logic 59048-02 A manual Configured Zonesets Data Window