Q-Logic 59048-02 A manual Send Arbff True instead of IDLEs

Q

A – Command Line Interface Set Config Command

Table A-9. Set Config Port Parameters (Continued)

Parameter	Description
ISLSecurity	E_Port security. Determines which
	switches a port will establish a link with.
	„ Any - link with any FC-SW-2 compliant
	switch. This is the default.
	„ Ours - link only with an FC-SW-2
	compliant QLogic switch.
	„ None - reject the link.
SymbolicPortName	Descriptive name. The default is Port.
ALFairness	Arbitration loop fairness. Enables (True) or
	disables (False) the switch’s priority to
	arbitrate on the loop. The default is False.
DeviceScanEnabled	Enables (True) or disables (False) the
	scanning of the connected device for FC-4
	descriptor information during login. The
	default is True.
ForceOfflineRSCN	Enables (False) or disables (True) the
	immediate transmission of RSCN
	messages when communication between
	a port and its device is interrupted. If
	enabled, the RSCN message is queued
	for 200 ms. The default is False. This
	parameter is ignored if IOStreamGuard is
	enabled.
ARB_FF	Send ARB_FF (True) instead of IDLEs
	(False) on the loop. The default is False.
InteropCredit	Interoperability credit. The number of
	buffer-to-buffer credits per port. 0 means
	the default (12) is unchanged.
ExtCredit	Extended credits. The number of port
	buffer credits that this port can acquire
	from donor ports. The default is 0.
FANEnable	Fabric address notification. Enables (True)
	or disables (False) the communication of
	the FL_Port address, port name, and node
	name to the logged-in NL_Port. The
	default is True.

59048-02 A A-33