Q-Logic 59048-02 A manual Using the Faceplate Display, Blades

2 – Using SANbox Manager Using the Faceplate Display

Q

2.13

Using the Faceplate Display

The faceplate display shown in Figure 2-11displays the switch name and operational state, and port status. Consider the following functional elements of the faceplate display:

„I/O blades

„Port views and status

„Working with I/O blades and ports

„Faceplate data windows

I/O Blades	Empty Slots	I/O Blade
		Status

Figure 2-11. Faceplate Display

2.13.1

I/O Blades

Figure 2-11shows how slots appear in the faceplate display with and without installed I/O blades. I/O blade failure status is indicated by a status icon as shown in Figure 2-11. The SANbox2-64 switch numbers its slots from 0–10 from left to right. I/O blades occupy slots 1–4 and 6–9. Ports on an I/O blade are numbered from 0–7 from top to bottom in slot 1, 8–15 in slot 2, and so on to 56–63 in slot 9. The Blade Info data window assigns blade numbers 0–7 to slot numbers 1–4 and 6–9.

2-22 59048-02 A