Q-Logic 59048-02 A manual Starting SANbox Manager

2 – Using SANbox Manager Starting SANbox Manager

Q

2.2

Starting SANbox Manager

To start the SANbox Manager application for the first time, choose one of the following methods:

„For a Windows platform, double-click the SANbox Manager shortcut, or select SANbox Manager from Start menu, depending on how you installed the SANbox Manager application. From a command line, you can enter the SANbox_Manager command:

<install_directory>\SANbox_Manager\sanbox_manager.exe

„For a Linux platform, enter the SANbox_Manager command:

/SANbox_Manager/SANbox_Manager

„For a Solaris platform, enter the SANbox_Manager command:

/usr/opt/QLGCsol/bin/SANbox_Manager

The application opens with the Initial Start dialog shown in Figure 2-1. If you prefer not to see this dialog, Check the Don’t show this dialog again box. This has the same effect as disabling the Display Initial Startup Dialog preference. Refer to ”Setting SANbox Manager Preferences” on page 2-11for information about setting preferences.

Figure 2-1. Initial Startup Dialog

2-6 59048-02 A