Routing and Extender Commands | Gefen EXT-DP-441 instruction

RS-232 COMMANDS

Routing and Extender Commands

The following commands do not require the ‘#’ character. A carriage return must be added to the end of each command.

Command

R

Description

Routing command

R Command

The R command switches to the speciﬁed input. Syntax:

r param1

Parameters:
param1	DisplayPort Input	[1 - 4]

23

Image 26

Gefen EXT-DP-441 manual Routing and Extender Commands, Command Description

Contents

Page Technical Support Hours Asking for AssistanceTechnical Support Write To Contents Gefen Gefen 4x1 DisplayPort SwitcherIntroduction How It Works Operation Notes Package Includes FeaturesFeatures Front Panel Layout Front Panel Input Indicators 1 Front Panel Descriptions Back Panel Layout Back Panel Back Panel Descriptions DP Out IR Remote Control Unit Layout and Description Installing the RMT-4IR Battery How to Resolve IR Code Conﬂicts Corresponding DIP Switch Settings for each IR Channel Wiring Diagram for the 4x1 DisplayPort Switcher Connecting the 4X1 Displayport SwitcherHow to Connect the 4x1 DisplayPort Switcher Switching sources using the front panel buttons Operating the 4X1 Displayport SwitcherFront Panel Buttons and LED Indicators Switching sources using the IR Remote Control Switching sources using RS-232 Switching sources using Telnet Serial Port Settings RS-232 Control #GETPASS Command RS-232 CommandsCommand Syntax #RSTIP Command #GETUSERNAME Command#IPCONFIG Command #SETTELNETPORT Command #SETHTTPPORT Command#SETPASS Command #SETUSERNAME Command #SGATEWAY Command #SIPADD Command #SNETMASK Command #USETELNETPASS Command #ACTIVEBOLO Command #FADEFAULT Function #IRRMTADD Command #LOCKPOWER Command #STBYMODE Command Command Routing and Extender CommandsCommand Description Telnet Control Gefen #sipadd New IP set to Specifications Warranty Product Registration This product uses UL listed power supplies