Gefen EXT-DP-441 manual #SIPADD Command, #SNETMASK Command

RS-232 COMMANDS

#SIPADD Command

The #SIPADD command specifies a new IP address. Dot-decimal notation must be used when specifying the IP address. A reboot is required after the new IP address is set.

Syntax:

#sipadd param1.param2.param3.param4

Parameters:
param1	IP address	[0 - 255]
param2	IP address	[0 - 255]
param3	IP address	[0 - 255]
param4	IP address	[0 - 255]

Example:

#sipadd 192.168.2.240

#SNETMASK Command

The #SNETMASK command specifies a new net mask. Dot-decimal notation must be used when specifying the IP address. A reboot is required after the new IP address is set.

Syntax:

#snetmask param1.param2.param3.param4

Parameters:
param1	IP address	[0 - 255]
param2	IP address	[0 - 255]
param3	IP address	[0 - 255]
param4	IP address	[0 - 255]

Example:

#snetmask 255.255.255.0

19