Gefen EXT-DP-441 manual Connecting the 4X1 Displayport Switcher

CONNECTING THE 4X1 DISPLAYPORT SWITCHER

How to Connect the 4x1 DisplayPort Switcher

1Connect up to four (4) DisplayPort source devices to the DisplayPort inputs on the back panel of the Switcher using DisplayPort cables.

2Connect a DisplayPort-supported display to the DisplayPort output on the back panel of the Switcher.

a OPTIONAL: To use the RS-232 communication feature, connect an RS-232 cable between the Switcher and RS-232 host controller.

b OPTIONAL: To communicate with the Switcher using Telnet, connect an Ethernet cable from the Ethernet jack on the back of the Switcher to the network. See page 24 for more information on using the Telnet feature.

c OPTIONAL: To extend the range of the IR control, connect an IR Extender (Gefen part no. EXT-RMT-EXTIR) to the back of the Switcher.

3Connect the included 5V locking power supply to the power receptacle on the 4x1 DisplayPort Switcher

4Connect the opposite end of the power supply to an open wall socket power source.

Wiring Diagram for the 4x1 DisplayPort Switcher

Computer

DISPLAYPORT CABLE RS-232 CABLE

ETHERNET

	Computer
Computer	Computer	IR Extender

IR

Router

DisplayPort Switcher

DisplayPort Display

RS-232 Controller

EXT-DP-441

ATTENTION: This product should always be connected to a grounded electrical socket.

11