Operation Notes | Gefen EXT-DP-441 manual

OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE 4X1 DISPLAYPORT SWITCHER

•The 4x1 DisplayPort Switcher supports Pass-through EDID. The Switcher will use the EDID from the currently connected monitor.

•Dual Link resolutions up to 2560 x 1600 are supported.

•HDCP content is not supported.

•This Switcher does not support DHCP.

•The default IR channel for both the Switcher and the IR Remote Control Unit is channel 0. See page 10 for more information.

2

Image 5

Gefen EXT-DP-441 manual Operation Notes

Contents

Page Technical Support Asking for AssistanceTechnical Support Hours Write To Contents Introduction Gefen 4x1 DisplayPort SwitcherGefen How It Works Operation Notes Package Includes FeaturesFeatures Front Panel Front Panel Layout Front Panel Descriptions Input Indicators 1 Back Panel Back Panel Layout DP Out Back Panel Descriptions Layout and Description IR Remote Control Unit Installing the RMT-4IR Battery Corresponding DIP Switch Settings for each IR Channel How to Resolve IR Code Conﬂicts Wiring Diagram for the 4x1 DisplayPort Switcher Connecting the 4X1 Displayport SwitcherHow to Connect the 4x1 DisplayPort Switcher Front Panel Buttons and LED Indicators Operating the 4X1 Displayport SwitcherSwitching sources using the front panel buttons Switching sources using the IR Remote Control Switching sources using Telnet Switching sources using RS-232 RS-232 Control Serial Port Settings #GETPASS Command RS-232 CommandsCommand Syntax #RSTIP Command #GETUSERNAME Command#IPCONFIG Command #SETTELNETPORT Command #SETHTTPPORT Command#SETPASS Command #SGATEWAY Command #SETUSERNAME Command #SNETMASK Command #SIPADD Command #ACTIVEBOLO Command #USETELNETPASS Command #IRRMTADD Command #FADEFAULT Function #STBYMODE Command #LOCKPOWER Command Command Routing and Extender CommandsCommand Description Gefen Telnet Control #sipadd New IP set to Specifications Product Registration Warranty This product uses UL listed power supplies