TELNET. To connect to the print server using TELNET on UNIX, Windows NT, or most other TCP/IP systems, type:
TELNET ipaddress
at the UNIX system prompt, where ipaddress is the IP address of the print server. When you are connected, push RETURN or ENTER to get the "#" prompt, enter the password ACCESS (it will not print), and type anything in response to the Enter Username> prompt. When you get the Local> prompt, you are ready to enter commands.
XCONFIG. To connect to the print server using the TROY XCD XCONFIG NetWare utility, insert the TROY XCD Print Server Software diskette in Drive A and type:
A:XCONFIG
at the DOS system prompt. If you have only one print server, you will be immediately connected. If you have more than one print server, you will be given a list of available print servers. Type the number of the print server to which you want to connect. When you are connected, When you are connected, enter the password ACCESS (it will not print) at the "#" prompt, and type anything in response to the Enter Username> prompt. When you get the Local> prompt, you are ready to enter commands.
GENERAL SERVER COMMANDS
CLear FAtal
Deletes fatal error log
CLear PAssword
Remove console password