information on setting the print server IP address with XAdmin32)
•HP JetAdmin (only required in the Control Panel if you have a version of JetAdmin earlier than V2.33)
•The appropriate network adapter driver (for example, 3Com EtherLink III)
If you want to use a version of JetAdmin later than 2.0, you must install JetAdmin on your PC. JetAdmin is included on the Windows 95 distribution CD, or it can be downloaded from the HP web site. The JetAdmin setup program provides a
Important: JetAdmin 3.3 or later requires XJet firmware version 3.58 or higher.
Important: Windows 98 requires either JetAdmin V2.54 (this version can be installed from the Microsoft Windows 98 CD by running the SETUP.EXE file in the
DRIVERS/PRINTERS/JETADMIN/DISK1/
directory) or V3.30 or later (available on the HP web site).
Configuring Windows 95/98
1.Go the Start button, choose Programs, HP JetAdmin Utilities and then Add HP JetDirect Printers. Select Custom Setup and press Next.
2.Select either IPX/SPX or TCP/IP printer, depending on which protocol you want to use. Click on Printer List to get a list of available printers (or you may manually enter the information).
