TROY Group MAN-EXT2000 manual PrintraNet Internet Printing

•Service Name: Enter the service name on the remote TROY XCD print server that you wish to use for printing. This is normally BINARY_P1 for the first parallel port, BINARY_S1 for the serial port, BINARY_P2 for the second parallel port, or BINARY_S2 for the second serial port. If you do not know the service name, you may leave this field blank and the default binary service will be used. Refer to Appendix B of the appropriate TROY XCD print server Administrator's Guide for information on how to use services.

•Your E-Mail Address: If you are using MAPI, skip this step. If you are using WINSOCK, enter your E- mail address (for example, shari@abc.com).

•SMTP E-Mail Server: If you are using MAPI, skip this step. If you are using WINSOCK, enter the IP address of your SMTP E-mail server (consult your network administrator if you do not know this address).

•Select Desired Notification: You may optionally have the remote TROY XCD print server notify you when the job is complete or when the job fails or both when the job is complete and if it fails. Select the desired option and then enter the E-mail address where you want the notification sent (generally you would want the notification sent to your own E-mail address).

•Press OK to continue.

PrintraNet Internet Printing 13-7