Appendix B
Using Services (lpd-Plus)
Overview
A service is a resource that can be accessed by computers that wish to print the print server. TROY XCD external print servers provide the following predefined services (do a SHOW SERVICE command in the print server remote console to get a list of available services; note that the serial port services will only be displayed if the serial port has been enabled for printing; the XConnect 100 will also display additional similar services for the second parallel and serial ports):
Service | Definition |
XCD_xxxxxx_P1 | Parallel port binary service |
BINARY_P1 | Parallel port binary service |
TEXT_P1_TX | Parallel port TCP/IP text service (adds |
| carriage return after each line feed) |
POSTSCRIPT_P1 | Parallel port PostScript service |
| (switches |
| PostScript mode) |
PCL_P1 | Parallel port PCL service (switches |
| |
XCD_xxxxxx_P1_AT | Parallel port AppleTalk service |
XCD_xxxxxx_S1 | Serial port binary service |
BINARY_S1 | Serial port binary service |
TEXT_S1 | Serial port TCP/IP text service (adds |
| carriage return after each line feed) |
POSTSCRIPT_S1 | Serial port PostScript service |
| (switches |
| PostScript mode) |
PCL_S1 | Serial port PCL service (switches |
| |
XCD_xxxxxx_S1_AT | Serial port AppleTalk service |