For example, to set up remote printer 3 for an HP printer with the TROY XCD print server XCD_00C3E4 using the PSERVER NLM called XCD1PS, you would type:
SET NET NPRINTER XCD1PS 3 ON XCD_00C3E4_P1
SET NET RESCAN
EXIT
NOTE: The same service cannot be used for both queue server mode and remote printer mode.
NOTE: If you want to enable remote printer capabilities on services other than the default NetWare services, you must define new services that are enabled for NetWare and for the desired port. Refer to Appendix B in this manual for information on how to do this.
6.You must now unload the PSERVER NLM from your NetWare file server console and then reload it in order for the changes to take effect.
Configuring the Workstation
The final step is to configure the workstation(s) to print to the TROY XCD print server. The TROY XCD print server can be used with any workstation that supports either the Novell or Microsoft client software.
Configuring the Workstation (Windows 95/98)
To use a NetWare print queue from a Windows 95 workstation, first make sure that the appropriate NetWare drivers are installed. Then go to the Start button, choose Settings, and then select Printers. Double click on the Add
