assign a password to the print server with the MANAGE program.
SET SERVIce service STreettalk queuename
Purpose: Enables the Banyan protocol on the specified TROY XCD print server service and associates this service with the StreetTalk name of a given print queue the VINES file server. Type SHOW SERVICE to see a list of the available services (if in doubt, use BINARY_P1 for the parallel port , BINARY_S1 for serial port, BINARY_P2 for the XConnect 100 second parallel port, and BINARY_S2 for the XConnect 100 second serial port).
3.If required, the following additional commands are available:
SET BANyan HOp nn
Purpose: Sets number of hops between the TROY XCD print server and the Banyan file server. The default value is 2, which is adequate for most sites, but you will need to change this value if the file server is more than two hops away from the print server.
SET BANyan [ENableDISable]
Purpose: Enables or disables Banyan protocol on the TROY XCD print server. Banyan is enabled by default.
SET BANyan TImeout nn
Purpose: Sets job timeout (in seconds).
CLEAR SERVIce service STreettalk
Purpose: Disables the Banyan protocol on the specified service.
