TROY Group MAN-EXT2000 manual Introduction

*The NDS support on the XJet III (all models), XJet IV-2, XJet IV-T, plus certain models of the XJet IV-Plus is limited to NPrinter mode only.

•Very high performance DMA operation (XConnect 100 and XConnect II only)

•High-speed Centronics parallel port compatible with IEEE P1284 Bitronics bidirectional parallel interface standard

•Serial port for console terminal or second printer

•Optional LocalTalk support (XConnect II only)

•Superior network and printer management

-Compatible with Hewlett-Packard JetAdmin and Web JetAdmin printer management software

-XAdmin Windows-based management utility (NetWare, TCP/IP, or VINES)

-Web XAdmin browser-based management

-SNMP MIB I and MIB II over IP or IPX (XConnect II and XConnect 100 only)

-Remote console management via DEC NCP, TELNET, NetWare, or serial port

•PrintraNet software for transparently sending documents to remote locations over the Internet

•lpd-Plus feature for providing multiple services with custom setup and reset strings, text-to-PostScript conversion, and character substitution

•Flash memory for easy updating of firmware via NetWare, BOOTP, tftp (master or slave mode), DEC MOP, Banyan VINES, or serial port

Introduction 1-3