
$MCR LATCP
CREATE PORT LTA33:/APPLICATION
SET PORT LTA33:/NODE=XCD_003C51/PORT=P1 SHOW PORT LTA33:
EXIT
$SET TERM
$SET DEVICE/SPOOL LTA33:
$INIT/QUEUE/START/ON=LTA33:/PROC=LATSYM XCD
Substitute your actual node name, port name (P1, S1, P2, S2, or LN), LAT port and queue name for the ones in the example. If you are using a service name, specify
/SERVICE= servicename instead of /PORT=P1.
Important: Use the default names unless you have specifically changed the names via the TROY XCD print server remote console.
Important: Be sure to specify PROC=LATSYM or the queue will not service requests from multiple host computers.
3.Execute the command file you have just created by typing "@" plus the file name in response to the VMS "$" prompt (for example, @LATSTART.COM). For additional convenience, you may want to include the "@filename" command in your system startup file so that the procedure is executed automatically when the system is booted.
4.Define or modify a form for use with the TROY XCD print server. VMS uses forms to define the page layout. If you are printing graphics or PostScript jobs, you must define your form for NOTRUNCATE and