2.If you are using XAdmin, start it up by double clicking on the icon.
If you are using WebXAdmin, start up your web browser (you must have a valid IP address configured in the PC and in the print server).
3.If you are using XAdmin, one or more TROY XCD print server NetWare services will show up in the list of printers (the default services names are listed in the Default Print Server Names section at the beginning of this chapter). Double click on the one that you wish to configure.
If you are using WebXAdmin, enter the IP address of the print server as the destination address in your browser and press ENTER or RETURN.
4.Enter the configuration password (ACCESS is the default) and press OK (XAdmin) or Submit (WebXAdmin).
5.If you have XAdmin, click on the NetWare tab.
If you are using WebXAdmin, click on Configure NetWare. You will see one or more enabled services (the default service names are listed in the Default Print Server Names section at the beginning of this manual). Click on the desired service.
6.If you are using NDS, type in the tree and context (the
context may be entered in either the form printers.mytree or OU=printers.O=mytree. If you are using XAdmin, click OK, Yes, and OK to save the
