![](/images/new-backgrounds/1183782/183782167x1.webp)
server volume that you selected in the previous step. Click OK to continue and go to step 9.
9.Click Yes when asked if you want to add the queue to the list of serviced queues. The queue name will now appear in the Available Print Queues in the selected context (for NDS mode) or under the selected volume (for bindery mode).
10.Click OK and then Next. If applicable, enter the IP address and click Next.
11. If desired you can enable users that will be notified in the event of printer problems. Click Finish. You can now use the print queue from your NetWare workstation.
Configuring the Print Server using XAdmin Version
2.0 or WebXAdmin (Queue Server Mode):
Important Note: Although XAdmin runs on Windows 95/ 98, TROY XCD recommends that you use XAdmin32 on these operating systems.
1.If you are using XAdmin 2.0, install the XAdmin software. On Windows 3.xx systems, go the menu bar in the Program Manager, select File, and then Run. Click Browse to locate the Setup file (either on floppy disk or in the \Utilities\XAdmin folder on
Click OK to start the installation.