(particularly if you are printing heavy graphics). Try creating multiple LAT processors (copy the LATSYM.EXE file) and splitting the load among these processors.
10.If your VMS graphics printouts are distorted, make sure that you have the LTA port set for PASSALL, PASTHRU, and TAB.
11.If you are having trouble printing PostScript files with VMS (PostScript errors or no printout), make sure that you have the form set for NOTRUNCATE and NOWRAP. Also, make sure you are not trying to print a flag page (unless you are using DCPS) since the flag page in the LAT symbiont is a
12.WordPerfect for VMS will cause problems printing to any network printer, not just TROY XCD. Specifically:
•If WordPerfect for VMS is installed on VMS 6.xx, you will not be able to print to the print server from more than one VMS system, even for non- WordPerfect print jobs. This is because WordPerfect does not properly break the circuit at the end of each job. The only solution is to
•If you have V6.1 of VMS and you are experiencing consistent queue pauses, you need to upgrade to V3.21 or later firmware. This problem is generally associated with a WordPerfect for VMS bug.
