need to set the WINS primary and secondary servers using the commands SET NETBIOS METHOD, SET NETBIOS PRIMARY, and SET NETBIOS SECONDARY commands from the print server console as described in Appendix A. This is not required if you are using NetBEUI only.
Print Server Configuration
To use the print server with a Microsoft network, you must know which domain it resides on. By default, Microsoft networks use the domain name WORKGROUP, so if you have not specifically configured a domain name for your network, you may use the name WORKGROUP and skip the remainder of this section.
If you have a different domain name, then you must configure this name into the print server. To do this, you may use XAdmin32, XAdmin, WebXAdmin, or the print server console to connect to the print server (refer to Chapter
3 for information on installing and using these utilities):
•With XAdmin32, double click on the print server name and then click on the Microsoft tab. Then enter the desired domain name.
•With WebXAdmin, click on Configure Microsoft and then enter the desired domain name.
•With the print server console, enter the command:
SET NETB DOMAIN domainname,
where domainname is the desired domain name.
